2. Choose the '
Serial Port Settings
' and then navigate to '
RTK Input
'.
•
If you are using an NTRIP Modem
: Enable '
NTRIP Mode
' and change the DGPS Baud Rate to '
115200
' by
pressing on the corresponding button next to the options.
•
If you are using a Static Base Station:
Ensure NTRIP Mode is '
Disabled
' and then select the correct baud
rate, this setting should be either '
115200
' for a Racelogic blue boxed radio or '
38400
' for a Satel grey boxed radio.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/06_-_VBOX_Touch_RTK
94