IMPORTANT
If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into a FAT32 file
system before it will work with a VBOX Touch unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the
FAT32
file format. This format is supported by VBOX Touch.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in
exFAT
or
NTFS
file formats; these formats are not supported by VBOX
Touch (please reformat as per instructions below).
SD Card Reformatting
• FAT32 reformatting for media with sizes up to 32 GB can be done directly within Windows by right-clicking on the
media and selecting '
Format
'.
• If you would like to format media with sizes above 32 GB into a FAT32 file system, this isn't something that can be
done directly within Windows as it is not the standard formatting for the file. However, many third-party software
programs can be used to reformat media to allow them to work correctly with our products - we can recommend
v
as a free option from the SD card organisation.
Power
The VBOX Touch unit is powered by a power cable that is unterminated so that you can make a bare-wire connection to
a power supply. The cable terminates in a 2-way connector that mates with the
socket on VBOX Touch.
On boot-up, the VBOX Touch will display a splash screen and automatically look for satellites and media.
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/VBOX_Touch_V2/
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V2/VBOX_Touch_V2_Lap_Timing_Mode_-_Quick_Start_Guide
3
