To return to the main screen, select the
Exit Button
on the bottom left.
Alert at End/Target
By default, an audible and visual alert signals when either the test end criteria, or the target speed is met within a
0-Speed-0 test. The VBOX Touch will beep and the 4 LEDs across the top of the device will flash
green
for 0.5 s. Tap
the button to disable.
Note: This setting will only apply to the Primary Test.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/04_-
_VBOX_Touch_Display_Modes/VBOX_Touch_-_Accel_Mode
32
