background image

.

To return to the main screen, select the

Exit Button

on the bottom left of the screen.

IMPORTANT

- Up to a maximum of 127 tests will be displayed in chronological order, however if more tests

have been completed, they will still be recorded on the SD card. Once the limit has been reached, a warning
message will be briefly shown, advising that further tests will not be saved to the Test History. The message
will show again if the unit is power cycled. A 'TEST HISTORY FULL' notification will also be shown beneath the

Live Speed

display. To view new test history results, press the

Reset Button

.

Save Results

You can also save the results as a .txt or .csv file (dependent on the

option selected

) to the SD card by selecting the

Save Button

on the bottom of the screen. When pressed, the unit will emit an audible confirmation notification. If the

results have been saved unsuccessfully, for example no SD card is inserted or the card is full, the button will flash 3
times and VBOX Touch will emit an audible error notification.

If saved successfully, the file name will include the test type, the date and also the time, taken from the first completed
run in that session. Along with the test history information

described above

, the results file also incudes average

acceleration information, as well as the latitude and longitude position (in degrees and decimal degrees format) added to
the session header.

Reset

Selecting the

Reset Button

on the bottom right of the screen will reset all test results shown on the current screen. When pressed, the LEDs will

briefly flash

green

twice and the unit will emit an audible confirmation notification.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_User_Guide/04_-

_VBOX_Touch_Display_Modes/VBOX_Touch_-_Accel_Mode

36

Summary of Contents for VBOX Touch




















































































































Reviews: