LED Behaviour
If two solid green LEDs are shown, the system is ready to record.
If the system is permanently fitted to a vehicle, it should be possible to view the front panel when it is mounted. A brief
overview of the LED behaviour is below.
OK LED
Green – Fast Flash
System powering up
Green – Slow Flash
Fully powered - No SD Card
Green – Solid
SD Card OK –
READY TO LOG
Orange – Slow Flash
Requires reboot
Red – Solid
System Error
The unit will automatically power cycle after
approximately 30 seconds
GPS LED
Green – Slow Flash
Searching for Satellites
Green – Solid
GPS Lock OK –
READY TO LOG
REC LED
Blue – Solid
Recording –
DO NOT REMOVE MEDIA
Blue – Fast Flash
Closing Files –
DO NOT REMOVE MEDIA
There is a fourth LED on the rear of the system. If the mounting solution only allows the back panel to be visible, this
status LED works on a simple ‘traffic light’ style system.
Status LED
Red
System Error
Orange
Not ready to record (either no GPS or no SD Card)
Green
Ready to record – system all OK
Blue
Recording –
DO NOT REMOVE MEDIA
4