Racelogic VBTOUCHR-V1, Quick Start Manual

Connectors

Antenna

If you are struggling to maintain a stable satellite lock,
you can connect the supplied external antenna
(RLACS262) to the antenna socket. You should also use
the external antenna when you are doing

Brake Trigger

Tests

. You can find more information about the external

antenna further down on the page.

Left Side

D IN/PPS

The Digital In and PPS port can be used for connection
to the

VBOX Brake Pedal Trigger

to provide brake

trigger deceleration tests. More information on this is

available here

.

The port can also be used to connect a Hand Held Start/
Stop Logging Switch (RLVBACS010) to control the
logging of the unit. More information on this is

available

here

.

CAN/Serial (Top)

The top CAN/Serial port can be used to output serial
information, allowing you to either connect VBOX Touch
to

VBOX Test Suite

via an RLCAB001 and conduct live

testing, or output lap timing parameters. You can find
more information about the Serial Output settings

here

.

Right Side

CAN/Serial (Bottom)

The bottom CAN/Serial port can be used by VBOX
Touch RTK units to receive RTK corrections via an

NTRIP Modem

or a Telemetry Radio Module with a

Static Base Station

. You can find more information

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_RTK/

Quick_Start_Guides_%E2%80%93_VBOX_Touch_RTK/Quick_Start_guide_%E2%80%93_VBOX_Touch_RTK%3A__Speed_Mode

6