Racepak
Racepak
Racepak
Racepak
949-709-5555
www.Racepak.com
Next, insert the memory card in the memory card reader. Now click on the button labeled
Set Sportsman Time
and Date
and follow the online instructions.
This procedure writes a file that contains the current time and date on the memory card. For the time to be set
accurately, you must immediately remove the memory card from your PC’s card reader, place it back in to the
Sportsman and turn on the power for at least 5 seconds.
Clearing Data Files from the Memory Card
Clearing run data files after each data upload is not required but it is highly recommended that you do not allow
too many run data files to build up. Storing too many data files on the memory card can also make it more difficult
to identify the proper run data file on future uploads. Eventually the memory card will fill to capacity, and the data
logger will no longer be able to record data. You can clear the data files from the memory card by performing the
following procedure:
1) Start the DataLink II software and open you Car Configuration file by Clicking on
File
from the Menu
bar and selecting
Open Car Configuration
. Select the configuration file named
Sportsman_Config
and
click
OK
2) This will open your car configuration file. Next, click on the
Organize Pane icon on the left tool
bar. This should bring up the run log pane as shown below.
21
O
p
er
a
tin
g
t
h
e
S
p
o
rt
sm
a
n
