background image

5

VA N TAG E   C L 1

Log onto portal.racepak.com and register your CL1 Data Box by following the step by step prompts shown online.  
Registration of the CL1 data box is provides a number of benefits, to the customer, and is necessary for use of the CL1  
product. There are a number of aspects of device registration that should be reviewed, before the registration process.

Register Device

1. Team: The creation of a team provides a secure location 
for all cloud based data, related to that particular team and 
CL1 data box. This action also provides the ability to define 
the desired Team from the kart mounted mobile device run-
ning the CL1 app, for cloud data uploading purpose. Teams 
are also presented to remote viewers, in order to select the 
correct team for data review.

2. Device Serial Number: 12 digit/letter combination found 
on the bottom of the CL1 data box.

3. Subscription: Available on a monthly or yearly basis, 
providing the ability for users to remotely view data from 
any location, utilizing an internet connected mobile device, 
running the D3 karting app.

My Teams

1. Provides ability to add individuals, for remote data 
viewing. A valid email address is required for each team 
member.

2. The team “owner” has exclusive access to the team, and 
as such is responsible for the addition or removal of team 
members, in order to provide access to, or remove access 
from, reviewing remote data.

Before you Begin,

Register your CL1 Data Box

Summary of Contents for Vantage CL1








































Reviews: