background image

Flight Controls

1. Turn on your Quadrone using   
  switch on the bottom side. Place it  
  on a flat surface. The red lights on  
  the Quadrone will begin to flash. Do  
  not move the Quadrone during the  
  syncing process to ensure the  
  gyroscope stays balanced.

2. Lower the Throttle joystick of the  
  remote to its lowest position. Slide  
  the controller’s power button to the  
  on position. The Quadrone’s red  
  lights will stop flashing and stay on.

3. Push the Throttle joystick to its  
  highest position and the remote will  
  beep. Now move it to its lowest position again and the remote will  

  

  beep a second time. The Quadrone and remote controller have been    
   synced together. You are now ready to fly.

• If you are not going to use your Quadrone for an extended period of  
  time, please take out the batteries in your remote controller.  Potential  
  battery leakage could occur and possibly damage the remote or   
  create a fire hazard.

• To charge your Quadrone,  

 

  plug the provided USB  

 

  charger into a USB port.  

 

  Connect the USB charger to    
  the charging port of the  

 

  Quadrone. The Quadrone is    
  now charging. A red light will    
  turn on on the USB charger    
  indicating the charging process has completed. Always charge your    
  Quadrone under adult supervision and out of the reach of children.

• Before flying your Quadrone, it is highly recommended that you  
  familiarize yourself completely with its controls. Read through the  
  instruction manual completely before attempting your first flight.

Push up on the throttle 
joystick. The Quadrone will 
begin to ascend.

Pull down on the throttle 
joystick. The Quadrone will 
begin to descend.

Elevation

Push the directional 
joystick to forward. The 
Quadrone will fly forward.

Push the directional 
joystick to the left. The 
Quadrone will turn to left.

Forward/Backward

Push the directional 
joystick to the right. The 
Quadrone will fly to the 
right.

Push the directional 
joystick to the left. The 
Quadrone will fly to left.

Aileron

Push the throttle joystick to 
the right. The Quadrone will 
turn to right.

Push the throttle joystick to 
the left. The Quadrone will 
turn to left.

Turning

6

Summary of Contents for QUADRONE















Reviews: