910088
1-inch Hydraulic Impact Wrench
racinerailroad.com
racinerailroad.co.uk
3.2023 Rev 2.3
Original Instructions
Page
14
of
25
Operating Instructions
The forward handle rotates 180° for use in a
vertical application.
To rotate the handle, pull the tee handle locking pin
back, rotate handle and make sure the locking pin
secures it in place before using the tool.
A grease zerk allows lubrication of the internal
impact components without disassembling the tool.
Connecting Hoses
6. Wipe quick couplers with a clean lint free cloth before connecting them.
7. Connect hoses from power source to the tool.
It is recommended that you connect the return hoses first and disconnect last to minimize or avoid
trapping pressure within the tool.
8. When connecting the quick couplers, the flow should run from male coupler to the female coupler.
The female coupler on the tool is the inlet. Quick couplers are marked with a flow direction arrow.
Pressurized fluid escaping from a damaged hose can penetrate the
skin and be injected in the body causing injury or death.
Do not pull on hoses to drag the power unit or tool
.
Note
: When possible, connect the free ends of uncoupled hoses to prevent build up in the hoses. The
sun can also increase pressure in the hoses and make connecting them difficult.
