910088
1-inch Hydraulic Impact Wrench
racinerailroad.com
racinerailroad.co.uk
3.2023 Rev 2.3
Original Instructions
Page
15
of
25
Tool Operation
1. Position the socket end over the bolt to be
installed or removed.
Use only sockets rated for impact use.
Sockets not designed to be used with
impacts can break apart causing injury to
operator or bystanders.
2. Shift the spool to the direction of rotation
desired, when holding the tool with the trigger
in the right hand pushing the spool to the right
for clockwise rotation.
Pushing the spool to the left rotates the socket
counter-clockwise.
3. Hold the tool securely with both hands, pull the
trigger lock, and pull the trigger.
4. To stop the driver, release the trigger.
•
When the nut contacts the surface of the material being fastened, limit impact time to 10 seconds.
•
Excessive wear will occur to the hammer mechanism due to the heat buildup if allowed to impact
for extended periods.
Do not shift the spool while the tool is operating, damage to
internal components may occur.
