background image

 

Trak Jack - 910192

 

 

Phone: (262) 637-9681  

Email: 

custserv@racinerailroad.com 

www.racinerailroad.com

 

10.2019 Rev 3 

Page 

5

 of 

18

 

 

Non-Warranty Parts and Service

   

Material damaged through normal wear and tear, abuse, misuse and/or neglect are not covered by our 

warranty and should be ordered directly from our Customer Service.  

Note

:  Parts for models that are no longer in production may not be available. 

Non-Warranty Parts Orders 

When placing a parts order please provide the following information: 

  Company Name and Billing Address 

  Purchase Order Number and Issuing Authority 

  Shipping Address 

  Special Handling Instructions 

  Contact Phone Number 

  Machine Model and Serial Number  

  Part Numbers and Quantities Being Ordered 

Note

:  

Please use Racine Railroad Products part numbers when ordering parts. 

Racine Railroad 

Products part numbers are shown in the parts lists and drawings of this manual and have only 

six (6) numbers.  

Any part number with other than six numbers (e.g. contains alpha-numeric characters) is a Vendor Part 

Number and 

not

 a Racine Railroad Products part number 

Safety Information 

For safe installation and operation of this equipment, carefully read and understand the contents of this 

manual. Improper operation, handling, or maintenance can result in equipment damage and personal 

injury. 
Only trained and authorized personnel should be allowed to operate this machine. In addition, all 

personnel at the worksite (gang) should be aware of the safety concerns and their individual 

responsibilities prior to working this machine.  
Please read and comply with all the safety precautions in this manual 

before

 operating this machine. 

Your safety is at risk. 

Safety Terms  

 

DANGER indicates a hazardous operating procedure, practice, or 

condition. If the hazardous situation is not avoided death or 

serious injury will occur. 

 

WARNING indicates a hazardous operating procedure, practice, or 

condition. If the hazardous situation is not avoided death or 

serious injury could occur. 

 

CAUTION indicates a potentially hazardous operating procedure, 

practice, or condition. If the hazardous situation is not moderate or 

minor injury could occur. 

 

Note: 

Indicates an essential operating procedure, practice, or condition. 

No personal injury is possible.

 

Summary of Contents for 910192



















Reviews: