1. SAFETY WARNINGS
WARNING! Before using this tool, please read this safety and operating instructions
carefully. Knowing and mastering this information and instructions will help you to use this
machine safely and reduce the risk of accidents and electric shocks.
If you give this unit to another person, give them this manual as well.
This machine shall always be used in accordance with the manufacturer's instructions laid
down in the instruction handbook. Any mishandling and any use contrary to the user
manual will not engage the responsibility of the manufacturer.
Failure to observe the safety and operating instructions may result in a risk of fire and/or
personal injury.
1) Training
a) Read the instructions carefully. Be familiar with the controls and the proper use of the
equipment.
b) Never allow children or people unfamiliar with these instructions to use the machine. Local
regulations can restrict the age of the operator.
c) Never work while people, especially children, or pets are nearby.
d) Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
2) Preparation
a) While working, always wear substantial footwear and long trousers. Do not operate the
equipment when barefoot or wearing open sandals.
b) Thoroughly inspect the area where the equipment is to be used and remove all objects
which can be thrown up by the machine.
c) WARNING
– Petrol is highly flammable:
Store fuel in containers specifically designed for this purpose.
Refuel outdoors only and do not smoke while refuelling.
Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol
while the engine is running or when the engine is hot.
If petrol is spilled, do not attempt to start the engine but move the machine away from the
area of spillage and avoid creating any source of ignition until petrol vapours have
dissipated.
Replace all fuel tank and container caps securely.
d) Replace faulty silencers.
e) Before using, always visually inspect to see that the tools are not worn out or damaged.
Replace worn out or damaged elements and bolts in sets to preserve balance.
3) Operation
a) Do not operate the engine in a confined space where dangerous carbon monoxide fumes
can collect.
b) Work only in daylight or in good artificial light.
c) Always be sure of your footing on slopes.
d) Walk, never run with the machine.
e) Work across the slopes, never up and down.
f) Exercise extreme caution when changing direction on slopes.
