5. ASSEMBLY
Unpack and lift out the rotary tiller, and take out other accessories and tools in the box. Read the
instructions carefully and operate every step strictly according to the instructions.
INSTALL THE DRAG STRUT
Remove the M6*35 bolts and nuts on the drag strut of the rotary tiller (Fig. 2) (Fig. 3), and insert the
drag strut into the corresponding hole of the rotary tiller from bottom to top, lead the screw through
the hole of rotary tiller and drag strut using M6*35 (Fig. 4), and lock the nut to the position over two
threads with a wrench (Fig. 5).
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5
M6*35 bolt
Drag strut
