d. Blowing mode
Blowing mode can be used for cleaning corners, fences, walls, wooden areas or beneath cars.
Be careful what you point the jet of air as it could move heavy material and cause injury or
damage.
- Inspect the work area before starting. Remove any debris or objects that could be thrown or
those that can get caught or obstruct the device.
- Put the shoulder strap.
- Push down the lever to choose the blowing mode.
- Hold the machine by the handle. Walk and hold the tube just above the ground and blow
the debris.
-
Switch on the tool by pushing and holding the ON/OFF switch.
- Work in order to gather the debris in one or more lots. Use the vacuum mode to collect the
heap. You can also pick up the pile of debris with a broom (or rake) and a shovel.
- When the operation is finished, release the ON/OFF switch.
- Throw away the debris in a trash bin.
e. Vacuum mode
- Inspect the work area before starting. Remove any debris or objects that could be thrown or
those that can get caught or obstruct the device.
- Put the shoulder strap.
- Push up the lever to choose the vacuum mode.
- Make sure that the collect bag is fitted properly.
- Switch on the tool by pushing and holding the ON/OFF switch.
- Put the tube to the ground without putting it in the debris. Move while sucking debris
- When the collection bag is filled, stop working and empty the bag.
17
