10
ASSEMBLY
NOTE: The blade is delivered already assembled. This part cannot be
altered or changed by operator. In case that the blade needs to be
replaced or sharpened, it shall be done by a specialist.
Folding handle
Caution! When installing the handlebars, make sure that the cables are not
crushed.
Attach the bottom of the handlebar to one of the 3 holes, with the supplied
bolts, to adjust the tilt angle to the desired height
2. Unfold the handlebar and push the lock lever towards the bar.
Grass catcher
- To install: Lift the flap and hang the grass bag at the back of the mower.