13
OPERATION
Start the device on a safe and flat ground, preferably not in tall grass. Make
sure that the cutting tools do not touch objects or the ground.
a. Start the engine
This lawnmower can be started electrically or manually.
Electrically
1. Press the priming button 3 times (red button)
2. Pull the operator control lever towards you and hold it.
3. Turn the key. The engine starts.
Manually
Take the starter rope with your right hand and pull slowly as far as to have
a resistance, and then pull energetically on the starter rope. (If the cold
start is not sufficient enough, repeat this operation 2 or 3 times).
Stop the engine
Release the operator control lever. The engine turns off and the blade is
slowed down. The blade should stop after 3 seconds.
b. Mowing
Self-propeller function
The self-propelled mechanism engages by pressing the safety lever on the
handle.
Self-propelled mechanism ceases when you release this bar.
Pull the safety lever back towards the handle to mow without the self-
propelled mechanism.
Work instructions
Mow dry grass as much as possible to save grass.
Adjust the cutting height so that the machine is not overworked.
Drive the machine at moderate speed (walking) along the belt as straight
as possible. For a perfect mowing result, the strips must always overlap
for a few centimetres
Do not back away.
Always work perpendicular to the slopes.
If the blades come into contact with a foreign object, immediately turn off
the engine. Wait for the blades to stop turning completely and check that
the unit has not been damaged. Only resume work if the unit has not
