4.6 LEVER ENGAGEMENT AND BRAKE OF BLADE
The lever has two positions, as shown on the plate:
–If the blade is engaged when safety conditions have
not been complied with, the engine shuts down and
cannot be restarted (
☛
5.2).
– In disengaging the blade (Pos. «A»), a brake is
simultaneously activated which stops their rotation within a
few seconds.
4.12 ACCELERATOR LEVER
Regulates the engine's r.p.m. The positions are indicated on a plate showing the
following symbols :
«CHOKE» (if fitted) = cold starting
«FAST» for maximum engine speed
«SLOW» for minimum engine speed
–The «CHOKE» position (if fitted) enriches the mixture so must only be used for the
necessary time for cold starting.
– When moving from one area to another, put the lever in a position between «SLOW»
and «FAST».
– When cutting, go to the «FAST» position.
4.6
A
B
4.12
14
Summary of Contents for RAC62PRRS
Page 11: ...3 6 FITTING THE DEFLECTOR 11...
