4.21 PULL START HANDLE
To start the engine, take the starter cable handle and give it a firm tug.
Then put the handle back in its seat, guiding the cable as it automatically rewinds.
4.22 ACCELERATOR LEVER
It regulates the rpm and stops the engine.
The positions are indicated on the plate showing the following symbols:
«OFF»
☛
4.11 for switching off the engine
«ON»
☛
4.11 for switching on the engine
«CHOKE» (if fitted) = cold starting
«FAST» for maximum engine speed
«SLOW» for minimum engine speed
– When engine (for Chinese engine) start, the lever must be in a position «CHOKE».
– The «CHOKE» position (if fitted) enriches the mixture So must only be used for the
necessary time for cold starting
– When moving from one area to another, put the lever in a position between «SLOW»
and «FAST».
– When cutting, go to the «FAST» position.
– Disengage the blade.
– Put the lever in a P parking block.
– Hang up the grass-box
5.1 SAFETY RECOMMENDATIONS
The machine must only be used for the purpose for
which it was designed (cutting and collection of grass).
Using the machine in any other way is considered "improper use" which will
invalidate the warranty, relieve the manufacturer from all liabilities, and the user will
4.22
15
Summary of Contents for RAC62PRRS
Page 11: ...3 6 FITTING THE DEFLECTOR 11...
