a)
The engine must only be started in the following conditions:
– the transmission is in “neutral”;
– the blade is not engaged;
– the operator is seated or the parking brake is engaged.
b)
The engine stops when:
– the operator leaves his seat when the blade is engaged;
– the operator leaves his seat with a gear engaged;
– the grass-catcher is lifted without disengaging the blade;
– the blade is engaged without the grass-catcher in place;
– the parking brake is engaged without disengaging the blade;
– the speed change is activated (
☛
4.4) with the parking brake on.
5.3 PRELIMINARY OPERATIONS BEFORE STARTING WORK
These controls ensure that the work gives the best results and is done in maximum safety.
5.3.1 Seat adjustment
Adjust the seat by sliding it along the bracket slots.
1. Loosen the four screws (1);
2. once you have found the right
position, securely tighten the four
screws (1).
5.3.2 Tire pressure
Having the correct tire pressure is essential for ensuring that the cutting deck is perfectly
horizontal and thus mows evenly.
1. Unscrew the valve caps;
2. Connect a compressed air line with a gauge to the valves and adjust the pressure to the
indicated values.
3. Screw the valve caps back on.
1
1
17
Summary of Contents for RAC62PRRS
Page 11: ...3 6 FITTING THE DEFLECTOR 11...
