5.4.7 Unblocking the collector channel
This job must only be performed with the engine Turned off.
If the collector channel gets blocked (due to accumulated grass cuttings filling up the
grass-catcher or an excessively high speed with relation to the quantity of grass cuttings),
you need to:
1. stop forward movement immediately, disengage the blade and stop the engine;
2. remove the grass-catcher;
3. remove the accumulated cuttings, reaching them from the exit of the collector channel.
5.4.8 End of mowing
When you have finished mowing, disengage the blade, lower the engine speed and ride
the machine with the cutting deck in the highest position.
5.4.9 End of work
Once you have finished mowing, stop the machine and engage the parking brake.
1. shift the accelerator lever to «OFF».
Always make sure that the accelerator level is in the
«OFF» position before leaving the machine unattended
!
5.4.10 cleaning the machine
After each mowing, clean the outside of the machine, empty the grass-catcher and shake
it to remove residual grass and earth.
Always empty the grass-catcher and do not leave
containers full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and detergent, taking
care not to wet the engine, the electrical parts or the electronic card located under the
dashboard.
Never use hose-nozzles or harsh detergents for cleaning the
body and engine!
Do not let debris and dry remains of grass accumulate in
upper part of the cutting deck in order to keep maximum machine efficiency and
safety levels.
23
Summary of Contents for RAC62PRRS
Page 11: ...3 6 FITTING THE DEFLECTOR 11...
