background image

 

1. SAFETY INSTRUCTIONS                                           

  

 

 

1.2 GENERAL WARNINGS                                                                      

 

WARNING: For your own safety, please read this manual before attempting to operate your new unit. 
Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarize 
yourself with your blower before each use. If you give this tool to another person, also hand over this 
manual. 
Use this tool as described in this manual.  Any mishandling and any use contrary to the instructions 
will not in any way engage the liability of the manufacturer. 
Non-compliance with safety instructions and use can cause a risk of electric shock, fire and /or injury 
to persons. 
 
READ YOUR USER MANUAL THOROUGHLY BEFORE OPERATING YOUR UNIT. 

  Never  allow  children,  handicapped  or  inexperienced  people  to  use  the  machine.  Local  regulations  may 

restrict the age of the user. 

  Keep children, bystanders and animals away from the machine when using it (at least 15 meters). 

  Remember that the user is responsible for accidents or damage to people or their property. 

  Never  dismantle  the  machine  by  yourself.  Any  disassembly  or  repair  must  be  carried  out  by  qualified 

personnel. 

  Always wear personal protective equipment (PPE) 

  Wear  long,  thick  pants,  boots,  eye  protection  and  safety  gloves.  Do  not  wear  loose  clothing,  shorts  or 

jewellery, and never work barefoot. 

  To reduce the risk of injury, never wear loose clothing, scarf, collar, chain, etc. as they could get caught in 

moving parts. If you have long hair, be sure to tie it above shoulder level to prevent it from getting caught 
in the moving parts. 

  The  machine  is  extremely  noisy  and  requires  the  use  of  good  quality  hearing  protection  every  time  you 

use it. 

  Carry the machine only by its handle. Never try to wear it in other places. 

  Refuel only in safe places. Open the tank slowly to release any pressure that may have built up in the tank. 

Clean any gasoline or spills from the machine before using it. To prevent any risk of fire, move at least 10 
meters away from the refuelling area before starting the machine. 

  Switch off the machine before any preparation, installation or maintenance. 

  All  machine  screws  should  be  properly  seated  and  tightened  securely.  The  machine  must  be  in  good 

working order. Never use this machine if it is not assembled correctly. 

  Keep handles clean and dry and free from gasoline or oil. 

  Always store the machine in a clean and dry place away from all electrical equipment. 

  Never start the engine in a closed or poorly ventilated room as the exhaust gases can be fatal. 

  Only operate the machine at reasonable times - not too early in the morning or late at night, when people 

may be disturbed. 

  Never use the machine in bad weather or if there is a risk of lightning or thunderstorms. Do not use in the 

rain or in wet areas. 

  Do not use this machine if you are tired, sick, under the influence of alcohol or drugs, or if you are taking 

medication. 

  Do not use this machine in a poorly lit area. 

  Keep a safe distance from moving parts and never touch surfaces that become hot during use. 

  Wear a mask that filters out microscopic particles if your work generates dust, to avoid the risks associated 

with inhaling harmful dust. 

  Before starting the machine, clear the area where you are going to use it. Remove stones, broken glass, 

nails, wire ropes, ropes or other objects that could be thrown or get caught in the machine. 

  Always  keep  a  good  balance.  Support  yourself  well  on  your  legs  and  do  not  extend  your  arm  too  far. 

Otherwise, you could fall, slip or injure yourself. 

  Let your machine cool down before putting it away. 

  Before transporting this machine in a vehicle, empty the fuel tank and secure the machine so that it cannot 

move during transport. 

  To reduce the risk of fire and burns, handle fuel with care. It is an extremely flammable substance. 

  Do not smoke when handling fuel. 

  Mix and store fuel in a container designed to hold gasoline. 

  Mix the fuel in the open air, away from any sparks or flames. 

  Choose a clean, bare surface, stop the engine, and allow it to cool before filling it. 

  Slowly unscrew the fuel cap to relieve pressure and prevent fuel from spilling around the cap. 

Summary of Contents for RACASBT314T



















Reviews: