background image

10. WARRANTY                                                              

 

The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years 
from  the  date  of  the  original  purchase.  The  warranty  only  applies  if  the  product  is  for  household  use.  The 
warranty does not cover breakdowns due to normal wear and tear. 

The  manufacturer  agrees  to  replace  parts  identified  as  defective  by  the  designated  distributor.  The 
manufacturer  does  not  accept  responsibility  for  the  replacement  of  the  machine,  in  whole  or  in  part,  and/or 
ensuing damage. 

The warranty does not cover breakdowns due to:

 

insufficient maintenance. 
abnormal assembly, adjustment or operations of the product. 
parts subject to normal wear and tear. 
 

The warranty does not extend to:

 

shipping and packaging costs. 
using the tool for a purpose other than that for which it was designed. 
the use and maintenance of the machine done in a manner not described in the user manual. 
 
Due  to  our  policy  of  continuous  product  improvement,  we  reserve  the  right  to  alter  or  change  specifications 
without  notice.  Consequently,  the  product  may  be  different  from  the  information  contained  therein,  but  a 
modification  will  be  undertaken  without  notice  if  it  is  recognized  as  an  improvement  of  the  preceding 
characteristic. 

READ THE MANUAL CAREFULLY BEFORE USING THE MACHINE.

 

When ordering spare parts, please indicate the part number or code, you can find this in the spare parts list in 
this manual. Keep the purchase receipt; without it, the warranty is invalid. To help you with your product, we 
invite you to contact us by phone or via our website: 

+33 (0)9.70.75.30.30

 

https://services.swap-europe.com/contact

 

 
You must create a "ticket" via the web platform. 

Register or create your account. 
Indicate the reference of the tool. 
Choose the subject of your request. 
Describe your problem. 
Attach these files: invoice or sales receipt, photo of 
the identification plate (serial number), photo of the 
part you need (for example: pins on the transformer 
plug which are broken). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for RACASBT314T



















Reviews: