6
7. When extending the connecting cable make sure it does not get jammed,
broken and the plug is not wet.
8. Connecting cables with a rubber socket with a plug for more difficult
conditions, protected against spraying water, to be used.
9. Do not use any provisional electric appliances. Never remove or switch off
the protective equipment and never put it out of operation.
10.Design of the connecting cables according to IEC 60245-4 1980 (DIN 57
282) with H 07 RN-F marking or equivalent types of design. Core cross
section of at least 3 x 1.5 mm2 for a maximum length of 25 m.
11.Electrical connection and repairs on the electrical line must be provided by a
licensed electrical professional and local regulations, the protective
measures, in particular, must be complied with.
12.Repairs on electrical parts must be executed by the producer or companies
specified by the producer.
13.If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
WARNING!
The protection class II will only be maintained when original
insulation materials/components
are used for a repair and when the insulation distances are not changed.
OPERATION
1. Never touch inside the running mixer drum. (rotary stirrer). Keep adequate
safety distance from the mixer.
2. Prevent any contact with the rotary or moving parts of the machine.
3. The mixer drum to be only filled and emptied when the engine is running.
4. Pay attention to the mixer drum rotation direction.
5. Do not change the engine revolutions as they regulate the maximum safe
work speed possible and protect the engine and all rotating parts against
damage by excessive speed.
6. Check the mixer for stability.
7. The full mixer drum is heavy - BE CAREFUL when emptying the drum.
