Page 2
Kit Contents
Assembly Components:
(1) Base Assembly
(1) VESA Monitor Bracket
Monitor Hardware Package:
(8) Nylon Spacers
(4) M4 x 10mm Pan Head Screws
(4) M4 x 18mm Pan Head Screws
(4) M4 x 25mm Pan Head Screws
Wall Mount Hardware Package:
(4) Pan Head Screws
(4) Anchors
PC Wall Mount Installation Instructions
Step 1.
Determine Location: Select appropriate location on wall. Consider cable routing
and length.
Step 2.
Mark Hole Positions: Hold Base Assembly in position and mark 4 hole positions
with pencil.
Step 3a
. Install Drywall Anchor: Install one drywall anchor at each hole mark. Using a
#2 Phillips head screwdriver press the anchor into the drywall while turning
clockwise until it is seated flush with the wall.
Step 3b
. Install 4 Screws: Leave 1/4" of each screw out of wall.
1/4"
