RackSolutions 104-2411 Installation Instructions Download

Page: 3 / 4

Installation Instructions

Step 4

. Attach Base Assembly: Attach Base Assembly to wall using the 4 screws that

were installed in 3b. Tighten Securely.

Page 3

Step 5.

VESA Monitor Bracket Attachment: Turn the monitor face down on a large flat

surface. Locate the four VESA mounting holes on the rear of the monitor.

a. Determine if spacers are required: Some monitors have a "recess" on the rear

of the monitor. Spacers are provided to fill this gap. See Table A for spacer

length options.

b. Determine Screw Length: Only use the metric M4 screws provided. The screw

length is determined by the spacers used (see Table A).

(4) Screws, Metric

See Table Below

VESA Monitor Bracket

Spacers

(See Table Below)

VESA Hole Pattern

Recess

Bottom

of Monitor

Summary of Contents for 104-2411

Page 1: ...Pan Tilt Monitor Wall Mount Installation Instructions Kit P N 104 2411 Patent s Pending...

Page 2: ...ion Instructions Step 1 Determine Location Select appropriate location on wall Consider cable routing and length Step 2 Mark Hole Positions Hold Base Assembly in position and mark 4 hole positions wit...

Page 3: ...ESA mounting holes on the rear of the monitor a Determine if spacers are required Some monitors have a recess on the rear of the monitor Spacers are provided to fill this gap See Table A for spacer le...

Page 4: ...the VESA Monitor Plate down over the top two Tabs on the Stand Tighten the Thumb Screw Pivot Assembly Tabs Pivot Bracket Thumb Screw Monitor Monitor Warranty Statement Innovation First Inc warrants o...