Antenna Alignment Tool – html page within unit management
Antenna Alignment Tool is optimized for devices with smaller
displays. All values are refreshed ten times per second to
enable smooth operation. The Antenna Alignment Tool is de-
scribed in Section
. The Tool is available on
http://<ip>/tk
, (e.g. http://192.168.169.169/tk for standard
Ethernet ports, alternatively on http://172.17.17.17/tk in the
case of connection through USB/WiFi or USB/Eth).
The Tool is accessible without any username or password.
Bar graph in web management
Within user management
Tools > Live data > Bar indicators
shows bar graphs of RSS and MSE values for local and peer
units. Values are refreshed every second or manually. See
Section
for detailed information.
4.7.4. Link test
Basic parameters of the link are RSS and MSE. They can be checked by many different ways:
• in
page Alignment (both sides, refreshed automatically)
• in the menu
and
(both sides, can be refreshed manually by pressing
the Refresh button or in real time with a period of several seconds after activating the Start button)
• on the screen
Tools > Live data > Bar indicators
(both sides, refreshed once a second After pressing
the Start button)
• on voltmeter (only local RSS value)
Verify the functionality of the radio link similar like in chapter
After installation, it is good to reset the statistics using the
Clear stats
button in menu
. This allows easier diagnostics of the link’s reliability over time.
4.7.5. Parameters setup
After both antennas have been aligned, setup operation parameters for the link. In the case of links
operating in the free band, setup the parameters based on survey results from the tool
. In the case of links operating on a licensed band, setup the parameters
based on the assigned license:
• Bandwidth
77
© RACOM s.r.o. – RAy3 Microwave Link
Installation
Summary of Contents for RAy3-11
Page 2: ......
