1.9. FCC authorization of transmitters
FCC verification
RAy2-11 and RAy2-18-C were verified for compliance according to CFR 47 part 101 [see §101.139(a)].
FCC comment -
according to §101.141 and considering the low spectral efficiency the following modulations are not
allowed in RAy2-11:
Modulation
Bandwidth
QPSK
2.5 MHz
QPSK
3.75 MHz
QPSK
5 MHz
QPSK, 16-QAM, 32-QAM
10 MHz
QPSK
30 MHz
QPSK
40 MHz
Except during anomalous signal fading. During anomalous signal fading, licensees may adjust to a
modulation specified in their authorization if such modulation is necessary, to allow the licensees to
maintain communications, even if the modulation does not comply with the capacity and loading require-
ments -101.141 (3).
FCC compliance
RAy2-24 complies with CFR 47 part 15.
FCC ID
FCC part
Code
SQT-RAY2-24
15
RAy2-24
15
© RACOM s.r.o. – RAy3 Microwave Link
Safety, environment, licensing