1.
Using the "X5" - external ETH/USB adapter
2.
Directly over the ethernet interface
https://192.168.169.169
PC 192.168.169.250
https://10.9.8.7
PC DHCP
Fig. 3.2: Connecting to a PC over ETH and over ETH/USB adapter
1.
PC connected via ETH/USB adapter
We recommend using the "X5" - external ETH/USB adapter (an optional accessory of the RipEX).
The ETH/USB contains a built-in DHCP server, so if you have a DHCP client in your PC as most
users, you don’t need to set anything up. The RipEX’s IP address for access over the ETH/USB
adapter is fixed: 10.9.8.7.
Go to 3. Login to RipEX
2.
PC connected directly to ETH port
Set a static IP address in PC, example for Windows XP:
Start > Settings > Network Connections > Local Area Connections
Right Click > Properties > General
select Internet Protocol (TCP/IP) > Properties > General
IP address 192.168.169.250 - for RipEX in the default state
Subnet mask 255.255.255.0
Default gateway leave empty
OK (Internet Protocol Properties window)
OK (Local Area Properties window)
Some Operating systems may require you to reboot your PC.
25
© RACOM s.r.o. – RipEX – Radio modem & Router
Demo Case – RipEX & M!DGE
