Fig. 3.25: Graph menu
3.7.4. Monitoring
Monitoring is an advanced on-line diagnostic tool, which enables detailed communication analysis over
any RipEX interface. In addition to all physical interfaces (Radio, Ethernet, COM1 and COM2), several
internal interfaces between software modules can be monitored.
Go to the
Diagnostic → Monitoring
menu and just click on the
Start
button. In the default settings, it
will display packet timing and payload on the Radio channel. For example, you can test Monitoring
while performing the Ping test (Chapter Section 3.6.1, “RipEX-to-RipEX Ping”).
Note
In order to see both on-line reports (Ping as well as Monitoring), start Ping in a new inde-
pendent window or tab in your browser.
41
© RACOM s.r.o. – RipEX – Radio modem & Router
Demo Case – RipEX & M!DGE
