In the HOME menu, you should now see that the Operational Status is up and so the router is connected
to the Mobile network. Click on the WWAN1 submenu to see the details like IP address, Signal strength,
Service type and other parameters.
Fig. 3.35: WWAN1 Summary
3.12. Practical Tests
3.12.1. Ping
Internet IP address
If you are connected to the APN which can reach Internet IP addresses, you can check the connectivity
by sending ping packets to any desired IP address.
Note
If you cannot access Internet IP addresses, you should be able to access other IP addresses.
It depends on the SIM and APN settings.
Go to the
SYSTEM → Troubleshooting → Network Debugging
menu. Fill in the Host IP address
and other parameters and click on the
Start
button.
49
© RACOM s.r.o. – RipEX – Radio modem & Router
Demo Case – RipEX & M!DGE
