H O M E S T O R A G E P R O D U C T S
WARNING
Please read installation instructions carefully prior to installing. Before
using the product thoroughly test the fully-weighted product (with equip-
ment in place) to ensure the product has been installed properly. Do not
allow children to play on product. ITW Brands is not responsible for any
damage resulting from improper installation, overloading or product
failure.
GOLF STORAGE HANGER | PG-2R
INSTRUCTIONS
Phillips driver
1/8” Drill bit
Drill
TOOLS REQUIRED
PARTS LIST
MARK
1
x1
Golf rack
x2
2’’ (5 cm) wood screws
Mark holes through level rack mounting plates,
drill 1/8” pilot holes and install screws into
stud. Tighten screws firmly.
