Problem Condition Check
Solution
When I turn my vehicle
on nothing happens?
1.
Power indicator
light is off while
riding.
2.
Indicating light
on motor is or
illuminated.
1.
Check power
connection and
battery level.
2.
Check battery
and motor
connection.
3.
Assess the
weather for
humidity.
4.
Check
regulator.
5.
Battery level is
low.
1.
Fasten connections.
2.
Recharge battery.
3.
Loosen connection and
wipe down with a damp
rag and dry and fasten
again. Contact a Rad2Go
service technician for
assistants.
4.
If there is any corrosion
replace. Contact a
Rad2Go service
technician for assistants.
5.
Change or replace
damaged part. Contact a
Rad2Go service
technician for assistants.
The Throttle does not
work or switch on, the
vehicle moves without
acceleration.
The Throttle does not
return to stop position.
1.
Check the grip
for damage
2.
Check the
Throttle spring.
3.
The Throttle
handle is loose.
1.
Use a flat head
screwdriver to adjust the
gap between the rubber
handle and the cover.
2.
Readjust the Throttle
spring position. Contact
a Rad2Go service
technician for assistants.
3.
Lubricate the Throttle
spring. Contact a
Rad2Go service
technician for assistants.
The batteries will not
take a charge.
Charger light is off
1.
Check the
charger plug
position.
2.
Check the fuse
in the charger
box.
3.
Charger has
blown a fuse.
4.
A bad
connection
exists between
the charger and
the battery.
1.
Check by unplugging
charger and plugging in
again.
2.
Unplug the charger and
replace the fuse. Contact
a Rad2Go customer
service to order a new
charger fuse.
3.
Replace the charger fuse.
The fuse box is located
on the floorboard,
unscrew the two screws
and open the fuse case,
and replace scooter.
Contact a Rad2Go
customer service to order
a new fuse.
4.
Unplug and plug in
again. Otherwise contact
your dealer or service
technician.
41
