Tel: +386 3 4900 800
http://radar-electronics.com/
3702003B
Copyright 2016
Page 11
Figure 9.
Vertical and Horizontal Angle Mounting Tolerances
The performance of the sensor can be negatively impacted if the sensor is
angled down, causing false detection from the ground. Any time the sensor
is not perpendicular to the ground, the performance should be tested.
Keep Out/Interference Zones
Metallic and any other strong radar reflecting objects must remain outside
of the keep out zones defined in
. If radar reflecting objects reside
within the keep out zones, testing must be performed to determine their
influence on the sensor’s performance.
Horizontal “Keep Out” Zone
Vertical “Keep Out” Zone
Figure 10.
Keep Out Zones
Summary of Contents for PreView Side Defender SDR8503
Page 24: ......