Introduction
Given the increasing proliferation of stray dogs and cats
in residential and industrial areas, country houses, etc., a
solution is needed to avoid problems and damagecaused
by them.
Instructions for Use
1. Plug in the other end of the provided electric supply
element plug cord into the upper part of the
DOG
|
CAT
REPELLER PRO device (see Figure 1). Place the front part
(in which the LED is located) pointing toward the area
where dogs and cats pass, and at a minimum height of
1 ft. (see Figure 2). Protect it from rain and from direct
contact with water.
2. Plug the electric supply element into the outlet and the
LED light indicator will go on.
3. Warning:
