15 of 16
TC-1000 Radar Speed Sign Installation Manual MN0018 v21.01
Final Touches
•
With nuts provided, attach the YOUR SPEED faceplate to the radar speed sign.
DO NOT
over-tighten.
•
For best results, it is highly recommended that you add a regulatory speed limit sign on the pole above or below
your radar speed sign. The speed limit sign and extender brackets are available from Radarsign®.
Radar Speed Sign Settings:
The factory settings of the radar speed sign are probably not the same as you would like to have for your installation.
The factory settings are: Min Speed: 20
Max Speed: 55
Speed Limit: 30
Using a Wi-Fi browser set up sign with correct time and date; then set initial parameters for sign operation.
(See Operation Manual available in the
Customer Resource Center
Radarsign software downloads, installation manuals, operation manuals, troubleshooting/repair/upgrade information
and forms, product sheets, spec sheets, and more can be found on our website.
Just go to the
section
https://www.radarsign.com/contact-us/
Click on
https://www.radarsign.com/customer-resource-center
Password:
safety
For additional assistance:
Email:
Phone:
678-965-4814
and ask for technical support.
