User Manual 2012
15
Slacken the locknut (7) and then retighten the axle bolt as necessary. Test for correct tightness
by spinning the wheel. It should rotate freely and slow down gradually to a halt. If it stops
abruptly, the axle is too tight and must be released slightly.
N.B. If any spokes appear loose or broken, do not use the chair. Refer to your local
wheelchair services or supplying dealer.
ARMRESTS.
Removing Armrests
1. Unlock the armrest by pressing the sprung release buttons (4) on the front and back of the
armrest
2. Pull the armrest straight up and out of the sockets.
Replacing Armrests
3. Push the armrest straight down into the sockets.
4. Make sure both ends slide over the sprung release buttons which should stick out and be
proud of the locating holes.
Desk Armrests