Step 5:
Install the battery.
①
Open the clip
②
Place the battery
into the charging groove
③
Lock the battery with the key
09
Step 6:
Install the bicycle pedals.
Step 7:
Switch to mode
Ⅰ
.
①
There is a RIGHT pedal marked R and a LEFT pedal marked L. Make sure the left and right pedals
are installed in the correct position.
②
Hold the crank arm vertically and push the pedal towards the bike.
③
Screw in the right pedal into the right crank arm in a clockwise manner, by hand at first.
④
Use the pedal wrench and tighten the pedal all the way in.
⑤
The installation of the left pedal is the same as the right one, but screw in anti-clockwise way
.
⑥
Make sure the threads of each pedal are fully into the crank arm.
eTrail Terra E-Bike