RF760 Full-Band Radio
14
13.3 If the receiving band has a radio station (except for the weather
band of WX North America), long press [MODE] for 2 seconds to
enter the preview function of the stored radio station. "L
×××
" will flash
ad give prompts; a station will be switched for each five seconds;
press any button to quit the preview function.
13.4 Under the shutdown state, short press [MODE] to switch
Fahrenheit/Celsius.
14. Enter SET Menu key at each band for introduction:
13.2.2 Short press super high frequency (VHF) and short press
[MODE] to switch meter band and the frequency points are:
VHF30.00MHZ, VHF136.00MHZ, VHF174.00MHZ, VHF220.00MHZ,
UHF409MHZ, UHF446.0620MHZ, UHF462.5620, UHF443.00
13.2.3 In the AIR receiving state, press the [MODE] to switch the
meter band and the frequency points are:
118.00MHZ, 123,00MHZ, 128.00MHZ, 133.00MHZ, 138.00MHZ
14.1 MW (medium wave) receiving state:
Note: AM broadcast needs the bandwidth filter to be 8.0 kHz as the
standard in the 520 to 1710 kHz band.
14.1.1 Short press [SET] for the first time; when the bandwidth
(BW) is flashing, short press [MODE] to set the bandwidth 1.80
KHZ, 1.00 KHZ, 6.00 KHZ, 4.00 KHZ, 3.00 KHZ, 2.50 KHZ and
2.00 KHZ,
14.1.2 Short press [SET] for the second time. When the MW
frequency point is flashing, short press the [MODE] and 520KHz
or 522 will be displayed.
520 displayed indicates that the mid-wave step value is 10kHz
(or 5kHz) and that the receiving range is between 520 kHz and
1710kHz.
522 displayed indicates that the mid-wave step value in FM is
9kHz (or 3kHz), and that the receiving range is between 522 kHz
and 1710kHz.
Summary of Contents for RF760
