13
EN
7. Functional description
The RolloTron Comfort DuoFern is a roller shutter drive
designed for use inside. The unit is installed as a flush-
mounted device. The power supply is provided via the
enclosed connecting cable with plug or a fixed installed
lead.
The RolloTron Comfort DuoFern can be controlled individu-
ally on site or it can be integrated into a DuoFern network.
As soon as you integrate your RolloTron Comfort DuoFern
into a DuoFern network, you can make use of many func-
tions offered by the corresponding DuoFern controllers.
The DuoFern receivers (actuators) and transmitters
must be connected to the DuoFern network.
You can find a detailed description of the various func-
tions, configuration options and possible combinations
for the DuoFern system at:
http://www.rademacher.de/duofern
.
i
Central control of several DuoFern devices with a single
RolloTron Comfort DuoFern.
A
DuoFern network
generally includes the
DuoFern
central operating unit
or the
HomePilot®
(together
with the associated user interface) as the central control-
lers.
Alternatively
you can also use the RolloTron Comfort
DuoFern as a central controller. To do so, you must
configure the corresponding DuoFern mode (See page
39).
Selecting a DuoFern mode
The RolloTron Comfort DuoFern comes with three
DuoFern modes
which enable you to specify how the
RolloTron behaves within the DuoFern network or local
installation on-site.
The following DuoFern modes are available for selec-
tion (see page 39).
[ 1 ] = DuoFern receiver
[ 2 ] = DuoFern transmitter
[ 3 ] = Local operation
