41
EN
15.2 Menu 9.9.2 - Set DuoFern mode
1.
Select and open menu
9.9.2 DuoFern mode.
2.
Select and confirm the
mode.
1
= DuoFern receiver
2
= DuoFern transmitter
3
= Local operation
+ -
+ -
Regardless of the set mode, all manual and automatic
control signals received via radio will be executed lo-
cally.
With one exception:
Control commands for the automated solar functions will
only be accepted if the solar mode
[ 3 ]
is activated (see
next chapter).
15.3 Menu 9.9.3 - Setting the solar mode
This function enables you to determine how the RolloTron
Comfort DuoFern reacts to signals from a locally connected
light sensor or control commands from a central sun shad-
ing controller (e.g. a DuoFern radio sun sensor).
The subsequent configuration of the automated solar
functions is correspondingly influenced by the selection
of the solar mode.
The following solar modes can be selected:
[ 1 ] = Local light sensor
[ 2 ] = Local light sensor and sunshine position
[ 3 ] = Central sun shading controller
i
