53
EN
10
11
12
13
1
RolloTube S-line Sun DuoFern Medium
2.
Saw a groove in the end of the precision tube
1
in order that the cam
of the adapter (8) can
be completely pressed into the tube.
7.6 Preparation for use of the precision tubes
◆
There may not be any play between the
groove
1
and the cam
.
3.
Slide the tubular motor into the precision tube.
4.
Mark the four fastening holes and subsequently drill
them through the precision tube into the catch
(10)
.
ATTENTION!
Drilling too deeply may break the freewheel
mechanism.
◆
Never drill deeper than 10 mm into catch
(10)
.
Drilling in the area of the drive causes serious
damage.
◆
Never drill in the area of the drive
(9)
.
5.
Screw or rivet the precision tube to the catch
(10)
.
Use four self-tapping sheet metal screws or four pop
rivets for this.
ATTENTION!
Screws or rivets that are too long interfere with
the freewheel mechanism.
◆
Do not use screws or rivets longer than 10 mm.