60
EN
(20)
27
8.4 Connection of the universal setting cable for manual
end point setting
1.
Open the terminal contacts by pressing the plung-
ers and connect all of the wires of the motor cable
(13)
with the same colours and corresponding to
their functions, see also figure
[ 22 ]
.
Pin assignment:
The connection is made with the same colours as
the connecting cable of the RolloTube S-line Sun
DuoFern, see figure
[ 22 ].
Button assignment for RolloTube S-line Sun DuoFern:
Button 1
= direction of travel (I / II)
Button 2
= set button (III)
Button 3
= continuous phase (ON/SET)
Button 1
Button 2
Button 3
