94
EN
17.2 Menu 9.8.3 - Setting the display lighting
Pressing one of the operating buttons switches the background
lighting on the display on and off after a predetermined time.
◆
After 10 seconds on the standard display
◆
After approx. 1 minute in the menus
1.
Open menu
9.8.3
.
2.
Set and confirm the desired
brightness levels.
0
= Switch off the permanent
display lighting
1
= Weak brightness
2
= Average brightness
3
= Maximum brightness
You can set the desired brightness level if the background light-
ing should remain permanently lit up in an idle state (without
pressing a button).