background image

39

EN

17.2  Menu 7.8.2 - Set DuoFern mode

1. 

Select and open menu 

7.8.2 DuoFern mode.

2. 

Select and confirm the 

mode.
1  
= DuoFern receiver
2  = DuoFern transmitter
3  = Local operation

NOTE
Regardless of the set mode, all manual and automatic 

control signals received via radio will be executed locally.

With one exception:
Control commands for the automated solar functions will 

only be accepted if the solar mode [ 3 ] is activated (see 

next chapter).

17.3  Menu 7.8.3 - Setting the solar mode

This function enables you to determine how the RolloTron 

Comfort DuoFern reacts to signals from a locally connected 

light  sensor  or  control  commands  from  a  central  sun 

shading controller (e.g. a DuoFern radio sun sensor).
The  subsequent  configuration  of  the  automated  solar 

functions is correspondingly influenced by the selection 

of the solar mode.

The following solar modes can be selected:

[ 1 ] =  Local light sensor
[ 2 ] =  Local light sensor and sunshine position
[ 3 ] =  Central sun shading controller

Summary of Contents for RolloTron Comfort 1623 45 19

























































































Reviews: