65
EN
18.7.3 Menu 7.3 - Configure ventilation position [ ]
If you want your roller shut-
ters to close at a different
position to the lower end
point, you can use this
function to determine an
arbitrary position (e.g. as a
ventilation position).
When closing automati-
cally, the roller shutters
will stop at the ventilation
position, however, they can
subsequently be closed
completely via manual
operation.
1.
Select and open
Menu 7.3 [ ]Ventilation
position.
Setting order
a)
Activate or deactivate
the ventilation position.
> continue at b)
> Return to menu
System settings
b)
Move the roller shutters
to the desired position.
or
c)
Enter the desired
ventilation position
by modifying the
percentage value.
0 % = the roller
shutters are
fully opened.
100 % = the roller
shutters are
fully closed.
On = Ventilation
position on
OFF = Ventilation
position off
d)
Confirm the ventilation
position and return to
the system settings
menu.
Summary of Contents for RolloTron Comfort 1623 45 19
Page 87: ...87 EN i...
