background image

73

EN

19.  Erase all settings, software reset

If necessary, you can 

erase all of your settings 

and return the RolloTron 

Comfort DuoFern system to 

its original factory settings.

1. 

 Simultaneously press and 

hold all four keys for 5 

seconds, until all of the 

icons are shown on the 

display.

2. 

Next, the device's software 

version will be displayed 

for a few seconds.
All settings will be erased 

and reset to the default 

factory settings.
Carry out the settings 

again as specified from 

page 26 onwards (installation 

wizard).

20.  Carry out hardware reset

A hardware reset can be carried out in the event that the 

RolloTron Comfort DuoFern fails to react to commands.

 

A hardware reset causes the internal power supply 

to  the  RolloTron  Comfort  DuoFern  to  be  briefly 

interrupted.

 

All of the previously configured settings will be 

saved apart from the time and date.

IMPORTANT
Never press the reset button when the motor is running,  

as otherwise the end points will be modified.

1. 

 

  

 

Press the Reset button using a sharp 

 

object (e.g. a paper clip). 

Summary of Contents for RolloTron Comfort 1623 45 19

























































































Reviews: