background image

77

EN

23.  What to do if... ?

i

Fault

Possible cause / solution

... the RolloTron Comfort DuoFern indicates no functions? Check the power supply incl. connecting cable and plug.

... the RolloTron Comfort DuoFern no longer reacts in the 

  morning at the configured switching time?

The electronic system switched off the drive after closing the roller 

shutters because the deflection roller stopped turning. This is the case if:

a)  The [ Down ] button was pressed for an excessive period of time 

 

during the configuration process for the lower end point. The roller  

 

shutter slats are closed, but the belt continued to wind and is no  

 

longer tight on the deflection roller.

b)  The lower end point is displaced due to elongation of the belt.
 

The belt may never be slack.

 

Reconfigure the lower end point (see page 64) and ensure that  

 

the belt remains tight to the deflection roller.  

 

In doing so, the deflection roller must turn evenly.

... the roller shutters no longer stop at the configured end 

  points?

The end points may be displaced due to elongation of the belt.  

Readjust the end points, see page 64.

... the roller shutters stop as soon as the control key is 

  released?

The end points are not configured. Configure the end points, see 

page 64.

... the RolloTron rotates in the wrong direction?

Possibly the belt is wrapped around the reel incorrectly, see page 21.

Summary of Contents for RolloTron Comfort 1623 45 19

























































































Reviews: