46
3.1 Intended use
Only use the RolloTron DECT for opening and closing roller
shutters with a permissible belt.
i
Mechanical locks of any kind are not suitable for
automated operation with this device.
Only use original spare parts from RADEMACHER
●
By doing so, you avoid the risk of malfunctions and damage
to your RolloTron DECT.
●
As the manufacturer, we provide no warranty for the use of
third-party components and accept no liability for conse-
quential damage resulting from such.
●
All repairs to the RolloTron DECT must be undertaken by
authorised customer service personnel.
Operating conditions
●
A 230 V / 50 Hz power supply, together with a site-provided
disconnecting device (fuse, MCB), must be available at the
installation location.
●
An easily accessible 230 V / 50 Hz socket must be available
if the enclosed connecting cable with Euro plug is being
used.
●
The roller shutter must run up and down smoothly. It
should not jam.
●
The mounting surface for the RolloTron DECT must be flat.
i
Radio systems that transmit on the same frequency
can cause interference.
Dangers in the case of improper use
Using the RolloTron DECT for purposes other than previously
mentioned is impermissible.