60
8.3 Drawing in and fastening the belt
Fastening hook
Moving the fastening hook to the correct position
1.
Insert the mains plug into the socket.
2.
Press the Up button until the fastening hook is easily acces-
sible in the reel compartment.
3.
Remove the mains plug again from the socket.
CAUTION!
Never reach into the reel compartment when the motor is
running.
Inserting the belt vertically from the top
Belt path
in the device
Feed the belt through the device, as shown in the image, and
slide it over the fastening hook from above.
